4 Sector Receiver

A base station is generally made up of a high power amplifier (HPA), low noise amplifier (LNA), modem, multiplexor, and up- and down- converters. For receiving digital data, the LNA boost the signals to the down-converter, which lowers the frequency and sends it to the modem. The modem demodulates the carrier, and the digital output goes to the demultiplexing device and then to its destinations.

Component Highlights

*DVGA - increases system dynamic range by providing automatic gain control.

*High resolution ADC - designed for speed and single-supply operation with sample-and-hold circuits.

*LDOs, Buck switching regulators - specifically designed for noise-critical, battery-powered applications such as base stations.

*Ethernet PHY - small size, low power, fully interoperable Ethernet PHY delivers up to 1 Gbps performance.

*LVDS - SerDes and PHY products for reliable high speed data and clock distribution.

(1) LNA
LMH6559
LMH6609
LMH6622
(2) DVGA
CLC5526MSA
CLC5526MSAX
LMH6502MA
(3) ADC
ADC11DL066CIVS
ADC11L066CIVY
ADC11L066CIVYX
(4) DDC
CLC5903SM
CLC5903VLA
(5) SerDes
DS92LV1021A
DS92LV1023E
DS92LV1260
(6) Signal- Conditioning
EQ50EVK
EQ50F100LR
(7) PLL + VCO
LMX2531LQ1570E
LMX2531LQX1570E
LMX2531LQ1650E
(8) Power
LM1572
LM25005
LM25007
(9) Temp Sensor
LM32
LM40
LM41
(10) LVDS Clock
Other Products:Serial Digital Interface (SDI)/SDV
Buffers/PHYs Single-Ended/Differential:Transceivers
Buffers/PHYs Single-Ended/Differential:Transceivers
(11) System Test Access
SCANSTA101SM
SCANSTA101SMX
SCANSTA111MT
(12) Ethernet
DP83816AVNG